Showing posts with label sewing. Show all posts
Showing posts with label sewing. Show all posts
Sunday, November 30, 2014
Giraffe Baby Quilt and Tutorial
This project was not one on my list. It is the giraffe's fault. Does that happen to you sometimes? I just happened upon this adorable giraffe print in the clearance bin at my local quilt shop a while back and had to have it.
I have a thing for giraffe's anyway and decided it would be fun to make a baby quilt with this fabric. It needed to be fast and fun. This quilt top only needs six fat quarters for the blocks (I used two fat quarters of the giraffe print plus four others), one fat quarter for the setting squares, and a yard of fabric for the sashing.
First, cut four 7 1/2" squares from each of the six fat quarters. You will have 24 squares total.
Sort the squares into pairs, making twelve pairs. I tried to maintain good contrast with each pair. Take each pair and place them right sides together.
Stitch a quarter inch seam on each vertical side of the blocks. Next, cut each block in half. The center of the block will be 3 3/4" from the side.
I could have just pressed these open and moved on but the blocks would be rectangles rather than squares and I wanted square blocks for this project. Rotate your block 90 degrees.
Trim 1/2" from one side. Press your blocks open.
Each block should measure 7" square. Repeat this with each pair of blocks. This goes really fast. Once your blocks are made, lay them out in six rows with four blocks each.
The blocks can all face the same way or be rotated or whatever looks best to you. I intended to have mine facing all sorts of directions but it got too busy and my giraffes were happiest when they were all playing close together.
From the remaining fat quarter, cut 35 2 1/2" squares for your setting squares. From the remaining yard of fabric, cut 58 2 1/2" x 7" rectangles for your sashing. All that is left to do is sew your blocks and rows together. Easy peasy.
This really is an easy project to make but I have to confess that it took me a little longer to get there. The blocks were a piece of cake. They came together in under two hours. Then I got a little over confident and decided to just throw a white sashing between the blocks and call it done.
Super duper fast. But I didn't like it. All that fun fabric and I thought the end result was sort of plain. It was all blue and yellow and white and totally ignored that awesome green color in the giraffe print. So I threw some green on top of it and knew I had to fix it. I painstakingly unstitched enough to add setting squares in the body of the quilt. Here's the first one.
Here's how it looked when I finished that step.
That was definitely better to my eye, but still incomplete. I took those outer borders off and added setting squares there, too.
Now it is complete. And adorable. With just the right amount of blue, yellow, AND green. The lesson learned here is to always play around with the layout and colors as much as possible before jumping into a quick project. There will still be times when changes are needed but I am certain I would have saved myself a little bit of unsewing if I had taken the time to really look and think before starting.
I have a nice yellow back and bright blue/teal binding all ready to go.
The quilting will have to wait a bit though. I'm out of 505 basting spray. Guess that means I'll be heading to the local quilt shop soon to restock. I can't wait to see what is in the clearance bin this time!
Labels:
baby quilt
,
blue
,
easy
,
fabric
,
fast
,
giraffe
,
green
,
sewing
,
tutorial
,
white
,
yellow
Tuesday, February 26, 2013
Treadling Away
Many years ago, my mom became the caretaker for my grandmother's treadle sewing machine. She invested in refinishing the cabinet, and as a piece of furniture, it makes a beautiful show piece. Somewhere along the way, my mom decided that it would become mine and it could go ahead and move to my house.
Recently, I became more interested in this machine. We had always said that it would work great if it just had a belt installed. I wanted to know if a belt really was all that it needed. We had a new belt, and Duane installed it fairly easily. Then it sat for a little while longer, because it was going to take some effort to figure out how to wind a bobbin and thread the machine.
A few YouTube videos later, the bobbin was wound, and the machine was successfully threaded. It was time to sew. One of the things I was worried about is how I would look using this machine. My hand-eye coordination isn't the greatest, so I had this fear of my head bobbing like a chicken while my feet went up and down on the treadle. No, I did not record myself sewing on it, and I'm fairly certain that it wasn't an overly embarrassing experience.
I love the contrast of the old machine with the modern thread. This machine deserves all the tender loving care it can get, and Aurifil thread will help keep it going long and strong.
With the excitement of being able to sew on this machine, I decided to see if I could find out more about its history. A quick search for the serial number shows that this machine was manufactured in 1911. Wow, 102 years old and still sewing strong. They just don't make them like they used to.
My grandmother was born in 1915. She and her husband raised a family of three daughters in McDonough, Georgia. They were a farming family, which meant it was often a challenge just to meet basic day to day needs. This machine was purchased as a used machine from a newly married couple in the community that had fallen on hard times and needed money more than they needed this sewing machine. My grandmother told me that she remembers how sad the new bride was when they picked up the machine from her home.
My mom told me that she used this machine often growing up and that she could make it go a hundred miles an hour. I can't wait to see her give it a try next time she visits.
Labels:
family
,
history
,
sewing
,
sewing machine
,
treadle
Saturday, January 19, 2013
Sewing Machine Cover
Near the end of last year, I really began to notice (and be bothered by) the amount of dust on the top of my sewing machine. I'm fairly good about cleaning out my machine between projects, but I hadn't paid much attention to the top or other areas of the machine that weren't directly involved with sewing.
As I was making a list of projects for this year, I decided it was time to make a sewing machine cover. My sewing machine is one of the most important things in my life and deserves to be treated with extra special care.
There were two guidelines for this project. First, it had to include selvedges, and second, it needed to include some of the new quilting designs that I have been practicing. I sketched out a few ideas to work out the design and figure out measurements, then got busy selecting fabric.
I wanted something fun, bright, and cheery. The main fabric is a Kona solid in coral. My daughter, Erica, chose the background fabric. The main body of the cover is divided into five long, narrow sections. One section is made from selvedges, and the other four will be mostly open space so that it can be filled with quilting.
To add a little pop, three circles that mimic the circles in the selvedges line up right across the front of the cover. It was a little bit of math and a little bit of guessing for where to place these. It all worked out just fine.
The circles and letters are fused to the main fabric, then sewn around using a straight stitch just inside the raw edge. The quilting includes straight lines, pebbles, and swirls.
The construction is completed in exactly the same way as a basic, lined tote, minus the handles. I used a fun owl print for the lining. Most of the time my sewing machine is in mid-project so the top is up and thread is on the spool. The cover sits up higher during those times.
For the times when I am between projects and the top of the machine is closed, I can turn a little cuff up on the bottom of the cover so that it still sits snugly on top of my machine and I can enjoy an extra bonus of owls around the base.
I enjoyed going outside my normal comfort zone, so much so that I'm thinking about putting together a tutorial for this project, or maybe even developing a pattern. For now, I'm just going to enjoy a cleaner sewing machine that calls to me every time I walk by....s-e-w!
Subscribe to:
Posts
(
Atom
)














